Sunday, February 26, 2017

Kitchen Lights

In 2011 we switched out the kitchen lights. The blog is here.


I was pretty happy with these lights at first. But these light bulbs are expensive and hot. 


We we replaced them again.





Saturday, February 25, 2017

Renaissance Fair

We went to the Renaissance Fair.


This guy told me, "Hey, my eyes are up here."



We took my sister Steph and she met up with her friend and the friend's boyfriend.

We checked out the vendors, watched a glass blowing demonstration, grabbed some lunch, and then went to find the mermaid exhibit.

The line to the exhibit was 45 minutes long. We kind of stood there, debating if it was worth it, and were approached by a guy who had been bellowing that his show was about to start. He asked if we were hesitating because of the long line. I said yes. He responded: You know what you have to do? You have to go in through the exit.

I went in through the exit. It was kind of thrilling because I'm usually a rule follower. All I saw was a curtain and a woman sitting in a chair with a mermaid tail and taking photos with kids. I would have been pissed to stand in line for 45 minutes. So I came back out and found J.

The same guy found us again and asked what I thought. I told him. He said there was a tank. I told him I didn't see a tank. He asked if I saw the curtain. He then said they were switching out the mermaids, they had to keep them fresh. They found one belly up this morning.

So I went back in. It was harder to work up the courage a second time but it was worth it because the curtain was drawn back and I could see the mermaid swimming. 


Then, because the guy had helped out and was funny, we went to his show. He is Gypsy Geoff and he is a juggler and a comedian. My eyes hurt after the show I was laughing and smiling so much.





The kids were so funny too. Geoff was really great at improv.






Oh it was a fun day.



Thursday, February 16, 2017

Valentine's Day

Valentine's Day I had a pretty busy day at work. I have a friend who works from home a lot, but on days he's going to come in he texts me to see if I want to go to lunch. So when he texted me about lunch, I totally forgot it was Valentine's Day and I should probably be spending it with my hubby. 

Tuesday morning Shawn wasn't at work so I texted him. He told me he had a doctor's appointment and would be in before lunch.

I got an instant message from security at 11:45 that J was at the gate. He brought me beautiful flowers. I may have cried a bit. I told him I had lunch plans with Shawn. He smiled and said no I didn't, he had set it up to make sure I was free and didn't have a meeting. Shawn never even came into the office.

Best. Surprise. Ever.

It almost made me wonder if J had done something naughty.


Our friend Adam and his business partner Bo have a flower/wedding business and they hooked him up with this gorgeous arrangement. Designs By Zima. Recommended.


We went to my favorite, In-n-out.


And then for dinner he made me crepes.


Valentine's Day is Osa's birthday. My baby is three. She loves gnawing on pots and i love that this one says Ready Set Grow. 

It was a good Valentine's Day. J did good. He did real good.

Sunday, February 5, 2017

Covering Boxspring with Fabric

This weekend was crazy. We pulled weeds, took a friend who just had a baby dinner, picked up compost, shoveled out compost, met a friend for brunch, pulled more weeds, did a Pinterest project I've been wanting to do forever, cleaned the house, pulled more weeds, trimmed the rose bushes, planted a bush and a few plants, pulled more weeds, tried to smoke out the gophers that have found their way into our yard (still waiting to see if it was successful), went out Saturday night, worked on a baby blanket for a friend's baby shower, went to a Super Bowl party....

My Pinterest project has been on my list for awhile now and it's just now happening.

I've had a bedskirt covering my boxspring but it keeps coming untucked and it just wasn't working. I saw on Pinterest that people were stapling fabric to their box springs when it shows and I thought that was a pretty good idea.

So I measured, and bought myself some fabric.

Here is the before:

I thought about cleaning everything and making it look pristine, but this is real life. 


We took everything off the bed so we could get to the box spring. My original plan had been to cut the fabric into strips and staple the fabric to the top and bottom. It was a surprise when I realized the bottom has wood, but the top is completely metal springs and I wouldn't be able to staple anything to the top. I briefly considered sewing it but really did not want to do that. Luckily, I had enough fabric that we were able to come to a plan B.


We just covered the entire top with fabric and stapled it to the bottom. I agonized over the fabric choice. I wasn't planning on going with a pattern, but I really loved this and figured I would just do it.


J helped me with the corners.


It didn't take too long.


I'm really happy with the box spring. It's nice not having the bunched up bed skirt anymore. 


The next thing I want to do is re-upholster the headboard but the fabric I bought looks purple in my room. I guess my lighting is off. I will not be using the fabric, so now I need to hunt down some that will work. We got some samples from Hobby Lobby but I don't love either of them.


I understand why people hire decorators because this is a big decision and I really don't want to be responsible for it.

I'm trying to pinpoint when I got so old. I look back on my posts years ago and look at all the crazy things I accomplished on the weekends. I am tired. I don't remember being this tired.

Monday, January 30, 2017

Electrical Outlet, Cattle Panel, and Potatoes

J has been busy with his brother Jacob in the backyard.

Jacob wants to build his own house so he wanted to try installing an electrical outlet. When we had the grill built, it was going to be $125 extra for an exterior outlet so we didn't do it. There is an interior box since J wanted a refrigerator, but if you want to plug anything additional into it you have to remove either the grill or the fridge to get to it.

So Jacob drilled through the cinder block and cement.



Ran the wire.




And connected it to the interior box.


Then he hooked up the outlet on the exterior.


He did a really good job. Everything works and nothing has burned down.

While he was doing that, J was busy planting potatoes.




Then we took the cattle panel and installed it on the wall.

Marcus The Truck is so awesome



J's original plan had been to use coaxial cable clips, which are plastic. I told him the Phoenix sun is really rough and that they would probably become pretty brittle. I suggested washers. Seems to be holding up pretty well. We'll see how much weight it can handle when he gets a vine growing up it.

Sunday, January 29, 2017

Framed Mirror

I had a full-length mirror on my bedroom wall so I could check my outfit top to bottom. It was just a cheap, plastic-framed mirror.

I saw on Pinterest that you can take the plastic edging off and replace it with wood. And all the blogs made it look oh so easy.

Lies.

I cried during this project. Real tears.

But let me back up to the beginning. I took my mirror off the wall, took it outside, and started taking the edging off.

And broke the mirror.

On my way to taking the mirror outside I snapped a Before. The dogs went crazy barking at the strange mirror dogs.


This mirror has no After because it died.
The mirror broke so bad that I put it in the trash. I thought about getting a glass cutter and trying to salvage it but I would have had to cut it too short. I wanted a full-length mirror.

And this project was on hold for awhile.

Until I bought a $6 mirror at Lowe's. I looked for one without a plastic edge, but since those have a nice beveled edge, it was $25. I figured I'd be really careful and save money, so I went with the cheaper option.






It freaking broke again. I was being so, so careful. Apparently there was room for improvement.

If anyone wants to try this and learn from my mistakes: Do NOT bend the plastic pieces back, that's how the mirror breaks. You need to make sure it is cut away with a box cutter. And the glue is thicker in the corners, which is why those are harder and the area that breaks.

The good news is I went to Home Depot and bought a $3 glass cutter (the one at Lowe's is $5 and had poor reviews online). This was another pain point and I don't have any photos because there was screaming (although no crying just yet). I cleaned the glass just like it said to do online, and put down my straight edge and cut.

And my straight edge slid and my cut was crooked.

J helped me out and we got a straight cut.

And again, the project sat. Weeks passed. It needed to think about what it had done. 

When I had recovered enough emotionally, I brought out the wood from the garage that had been sitting there patiently for two months.

I cut the two shortest top and bottom pieces and prepared to router out an edge for the mirror to sit in.


I put another piece of wood the same width next to the piece I was going to router so that my straight edge had something to sit on and be stable. 


I measured to determine how far away my straight edge needed to be from my routered edge.


I should have clamped it, but I just held it down with my hand. A few times I pushed too hard on the edge with my router and it shifted and cut too deep, but I just adjusted and concentrated on pushing forward instead of to the side.

I think we've already established that I am not a professional.

After the picture frame disaster, I didn't even try mitered edges.
I made marks on my wood so I didn't route all the way down, just where the mirror would sit.

And promptly forgot all about it and routed the entire edge of the first piece of wood.


But I did better on my second, you can see the routed edge stops.


Then I realized my top and bottom pieces were too long, because the routed edges pushed the wood closer. Um, hello, should have thought of that.

Not a profesional.

Also not a big deal, I was able to shave those pieces down.

I was so excited. This project which had caused me such angst was so close to being done! I just needed to make the pocket holes!

And this is where I cried. I didn't realize it, but the bit they give you for the Kreg Jig is super long. I just used a regular small bit. Well the head of the drill gets in the way and causes the screw to tilt at an angle. The screw popped out on the other side and cracked my wood.

This is where I cried. I had spent a very freaking long time measuring, cutting, and routing this wood and now it was cracked. J comforted me. Then helped me fix it. We glued and clamped the wood. Got the proper Kreg Jig bit, and did it correctly.

The wood on the right was where it cracked. The wood on the left had its own problems. Not a professional.
Stupid traitorous pocket holes
I did a couple dry fits and had to route out just a wee bit more to make sure the mirror fit snugly. I carried the mirror so, so carefully every time I moved it. I would have been livid if I dropped it and it shattered. But it survived. 

Then it was ready for stain. I stained a couple sample pieces of wood and J and I decided on Dark Walnut.


I flipped it over and was just going to stain the routered edge, since I had read that the mirror will reflect the glued edge. But I ended up just staining the whole thing.


Then it was time to glue the mirror and I grabbed my e6000 glue. The top was screwed on but it was broken and missing the most important piece! I am not a superstitious person and really wasn't worried when I broke that mirror, but maybe there is something to this.

Or not, because I put a toothpick in there and was able to use the glue. Except my hand cramped and I squished the bottle in half, which caused it to rip and get glue all over my hand. But I still glued my mirror so whatever. 

While I was waiting for it to dry, I was wondering if the glue would be enough.


 I went to Lowes and asked if they had anything like the holders on a picture frame. He gave me this:


The plastic pieces were actually pretty thick so I didn't love it. I ended up getting mending braces:


And when I got home, the glue did such a good job that I didn't even use them. But the good news is that I've been meaning to shore up J's dirt sifter and they will work just fine for that, so I'll keep them.

Don't judge my bedroom; we have family living with us temporarily so all my junk is stored in the corner.
I am pretty happy with the After. It was just way too much work. Maybe after a few days the pain will have faded and I can just enjoy it.